Patio Services: Installation, Repair, Remodeling, Extension & Sealing

Last updated 2026-07-30

← Back to patios

Patio projects range from laying a new surface from scratch to fixing a single cracked paver to extending an existing patio by 200 square feet. Knowing which service you need — and what it should cost — prevents scope creep and budget surprises. Here is what each service covers.

Understanding Patio Service Categories

Installation is building a new patio from bare ground. The process includes excavation, base preparation (gravel compaction and sand leveling), surface material installation, joint sand or grout, and edge restraints. Expect $8 to $30 per square foot depending on material. A 400-square-foot paver patio costs $5,000 to $8,800. Travertine costs $6,000 to $12,000. Timeline: 1 to 2 weeks for most projects.

Remodeling replaces the surface and may change the layout — expanding the footprint, adding a fire pit zone, or converting a cracked concrete slab to pavers. Demolition and disposal of the old surface adds $1 to $3 per square foot. Total cost: $10 to $35 per square foot including new materials. A 300-square-foot remodel starts around $3,000 and can exceed $10,000 with layout changes.

Repair fixes specific problems without replacing the entire patio. Common repairs: sunken pavers ($200 to $800 to re-level), cracked concrete ($500 to $2,000 to patch), drainage issues ($1,000 to $3,000 to install channel drains or re-grade), and loose coping around a pool ($300 to $1,000). Repairs should be done promptly — a small crack becomes a large crack after one Florida rainy season.

Extension adds square footage to an existing patio. The challenge is matching the new surface to the old — especially with materials that weather and change color over time. Expect to pay the same per-square-foot rate as new installation plus a 10 to 20 percent premium for the tie-in work. Extensions under 100 square feet are often not cost-effective due to minimum job charges.

Sealing protects patio surfaces from Florida's UV exposure, rain, and mold. Travertine and stamped concrete need sealing every 2 to 3 years. Pavers benefit from sealing to lock in joint sand and prevent weed growth. Cost: $1 to $3 per square foot. Sealing extends the life of the surface and makes cleaning easier — it is the cheapest long-term maintenance you can do.

Ready to Start Your Patio Project?

Call (352) 555-0194 for free estimates from licensed contractors serving The Villages, Gainesville, Clermont, Clearwater, and Largo.

Patio extension blending new paver section with existing concrete patio surface

Patio Extension: Cost, Design, and How to Expand Your Space

Patio extension guide — cost per square foot by material, how to match existing surfaces, permit requirements, and how e…

Learn More →
Patio installation showing base preparation, gravel layer, and paver installation

Patio Installation: Cost, Process, and Tips by Material

Patio installation guide — cost by material type, step-by-step process from excavation to sealing, permit requirements, …

Learn More →
Patio remodeling showing old surface removal and new paver installation

Patio Remodeling: Cost, Ideas, and What You Can Change

Patio remodeling guide — surface replacement, layout changes, adding a roof, and how remodeling differs from extension. …

Learn More →
Patio crack repair showing settled pavers and surface damage on concrete

Patio Repair: Common Problems, Costs, and Solutions

Patio repair guide — common problems by material type, cost to fix cracks, settling, stains, and drainage issues, and wh…

Learn More →
Patio sealing being applied by roller to stamped concrete surface

Patio Sealing: Cost, Best Sealers, and How Often by Material

Patio sealing guide — best sealer type for each material, cost per square foot, how often to reseal, DIY vs professional…

Learn More →